What This Product Does

The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE is a dedicated WISP CPE and long distance wireless network solution. It integrates the functions of a Wireless Access Point, WISP Client, high-gain antenna and is housed in a weatherproof enclosure. A 12dBi high-gain antenna, high-output power and high-RX sensitivity can significantly extend the transmission range to deliver a more stable wireless connection. Complying with IEEE 802.11b/g, the TL-WA5210G creates a wireless network of up to 54Mbps, making it great for Internet surfing and file exchanges.

Weatherproof Design, Durable Outdoor Solution

The TL-WA5210G is designed to work in harsh outdoor environments. Housed in an outdoor, weatherproof enclosure the TL-WA5210G is designed for extreme weather conditions. It also features a built-in 4000V lightning and 15KV ESD to help protect from storm/lightning surges and ensures reliable operation.

High Power & Receive Sensitivity

The device features high power which facilitates higher speeds at further range for long distance applications, giving your network the flexibility to go further. Signal degradation when traveling long distances is mitigated using high RX sensitivity, meaning that you can get higher speed at further distances.

Long Distance Outdoor, Break the limitation of WiFi

The TL-WA5210G features 12dBi, dual-polarized antennas which allow for long distance Wi-Fi connection. The ACK timeout software is adjustable by setting the distance between two Aps. It allows you to adjust the timeout value up to 15km for outdoor long distance operation, or even 52km with higher gain antenna support.

Multiple Applications, Available in Various Industries

Supports AP Client, Client Router, Bridge, Repeater, AP and Gateway operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Especially in AP Client Router Mode for WISP CPE, the AP will behave as a client of the Wireless Internet Service Provider (WISP). Router functions are added between the wireless WAN side and the Ethernet LAN side therefore the WISP subscriber can easily share the WISP connection with a simple switch.

Passive PoE Supported for More Flexible Deployment

The TL-WA5210G is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever the AP may be located; even up to 200 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

• High output transmission power and reception sensitivity optimized
• 12dBi directional antennas fit for various environments and boost your signal level
• Weatherproof enclosure and lightning protection terminal integrated
• Supports WISP Mode
• Supports Passive Power over Ethernet
• Support 15kV ESD Protection
• Supports AP Client Router, AP Router and AP operation mode
• Distance Adjustment for long range transmission, up to 50km
• Supports Antenna Alignment
• Supports Layer 2 User Isolation
• Provides throughput monitor indicating the current wireless throughput.
• Supports Ping Watch Dog
• Supports Wireless Speed Test
• Supports Remote Management.
• Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security
• Provides external RP-SMA connector for higher gain antenna upgrade

HARDWARE:

Interface
1 10/100Mbps Auto-Sensing RJ45 Port(Auto MDI/MDIX, PoE)
1 External Reverse SMA Connector One Grounding Terminal

Button
Reset Button

External Power Supply
12VDC / 1.0A Linear PSU

Wireless Standards
IEEE 802.11g, IEEE 802.11b

Antenna
12dBi Dual-Polarized Directional Antenna

Dimensions (W x D x H)
265x120x83mm

Antenna Beamwidth
Horizontal: 60° Vertical: 30°

WIRELESS:

Frequency
2.4-2.4835GHz

Signal Rate
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)

EIRP
<20dBm (EIRP, For countries using CE Standards)
<27dBm (Peak Output Power, For countries using FCC Standards)

Reception Sensitivity
802.11g 54M: -76dBm 48M: -78dBm 36M: -82dBm 12M: -91dBm 9M:-92dBm 802.11b 11M:-90dBm 5.5M:-92dBm 1M:-98dBm

Wireless Modes
AP Router Mode AP Client Router Mode (WISP Client) AP/Client/WDS Bridge/Repeater mode

Wireless Functions
WDS Bridge, Wireless Statistics

Wireless Security
SSID Enable/Disable MAC Address Filter 64/128/152-bit WEP Encryption WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP) Encryption

Wireless Range
15km with Integrated Antenna 50km Maximum (High gain directional antenna required)

Advanced Functions
Up to 60 meters PoE is supported
Provides 4-level signal LED indicator

OTHERS:

Certification
CE, FCC, RoHS

Package Contents
TL-WA5210G
Power Supply Unit
Power Injector
Resource CD
Quick Installation Guide

System Requirements
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC OS, NetWare, UNIX or Linux.

Environment
Operating Temperature: -30°c- 40°c
Storage Temperature: -40°c - 70°c
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing