Welcome to Anyware! Login or Register

Call: 1300 269 927

APC (AP8959) RACK PDU 2G, SWITCHED, ZEROU, 20A/208V, 16A/230V, (21) C13 & (3) C19

SKU: APC-AP8959

APC (AP8959) RACK PDU 2G, SWITCHED, ZEROU, 20A/208V, 16A/230V, (21) C13 & (3) C19

More Views

  • Switched PDU
  • 16 AMP Single phase
  • IEC C13 x 21, IEC C19 x 3
Details

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customisable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorised use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritising the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralised Management platforms using Infrastructure Central, Capacity Manager and Change Manager.

Features
  • Load indicator LED
    • Indicates overload and warning conditions based on the user-defined alarm thresholds.
    • Alerts users of potential overloaded circuits.
  • Flash Upgradeable
    • Quickly and easily upgrade firmware via network download for future product enhancements.
    • Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
  • Integrates with StruxureWare Data Center Expert
    • An IT-ready, scalable access monitoring system that collects, organises, and distributes critical alerts,
    • surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
  • Network Management Capabilities
    • Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet.
    • Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time.
    • Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
  • Remote Individual Outlet Control
    • Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimise costly downtime and avoid travel time to equipment).
  • Alarm Thresholds
    • Define alarm thresholds in order to avoid overloaded circuits.
    • Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
  • Local Current Monitoring Display
    • The aggregate current draw per rack PDU is displayed on the unit via a digital display.
    • The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
  • Power Delays
    • Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads.
    • Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
Specifications

Output

  • Nominal Output Voltage 100V, 200V, 208V, 230V
  • Overload Protection No
  • Maximum Total Current Draw16
  • Output Connections (3) IEC 320 C19 (Battery Backup), (21) IEC 320 C13 (Battery Backup)

Input

  • Nominal Input Voltage 200V, 208V, 230V
  • Input frequency 50/60 Hz
  • Input Connections IEC-320 C20
  • Acceptable Input Voltage 100-240VAC
  • Maximum Input Current 20A
  • Regulatory Derated Input Current (North America) 16A

Physical

  • Maximum Height 1791mm, 179.1cm
  • Maximum Width 56mm, 5.6cm
  • Maximum Depth 46mm, 4.6cm
  • Net Weight 5.73kg
  • Shipping weight 7.86kg
  • Shipping Height 2002mm, 200.2cm
  • Shipping Width 165mm, 16.5cm
  • Shipping Depth 114mm, 11.4cm
  • Color Black
  • Units per Pallet 48.0

Environmental

  • Operating Environment -5 - 45 °C
  • Operating Relative Humidity 5 - 95 %
  • Operating Elevation 0-3000meters
  • Storage Temperature -25 - 65 °C
  • Storage Relative Humidity 5 - 95 %
  • Storage Elevation 0-15000 meters