Welcome to Anyware! Login or Register

Call: 1300 269 927

APC Power Saving Back-UPS ES 8 Outlet 700VA 230V

SKU: APC-BE700G

APC Power Saving Back-UPS ES 8 Outlet 700VA 230V

More Views

  • Power-Saving Back-UPS ES 8 Outlet 700VA 230V
  • Adjustable voltage sensitivity
  • Audible alarms
  • Automatic self-test
  • Battery failure notification
  • Battery replacement without tools
  • Battery-protected and surge-only outlets
  • Cold-start capable
  • Data-line Protection
  • Hot-swappable batteries
  • Safety-agency approved
  • USB connectivity
  • User-replaceable batteries
Details
  • Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Provides notification of changing utility power and UPS power conditions
  • Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Provides temporary battery power when the utility power is out.
  • Provides protection of connected equipment from power surges on the data lines.
  • Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Provides management of the UPS via a USB port (not available on all models).
  • Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

UPS Promotion July 2016

Features

Protection

  • Battery and surge protected outlets:Back up and protect your hardware and data during power outages, surges and spikes.
  • Surge only outlets:Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Manageability

  • Audible alarms:Provides notification of changing utility power and UPS power conditions
  • LED status display:Quickly understand unit and power status with visual indicators.

Safety

  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Marketing Features

  • Battery-protected and surge-only:outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Availability

  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Specifications

Output

  • Output power capacity: 405 Watts / 700 VA
  • Max Configurable Power (Watts): 405 Watts / 700 VA
  • Nominal Output Voltage: 230V
  • Output Frequency (sync to mains): 47 - 63 Hz
  • Output Frequency (not synced):50Hz +/- 0.1% for 50Hz nominal
  • Other Output Voltages: 220
  • Waveform type: Stepped approximation to a sinewave
  • Output Connections:
    • (4) Australian (selector_surgetitle)
    • (4) Australian (Battery Backup)
  • Output Voltage Tolerance: +/- 5% static and 100% load step
  • Transfer Time: 6ms typical: 10ms maximum

Input

  • Nominal Input Voltage: 230V
  • Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
  • Input Connections: Australian/Chinese
  • Cord Length: 1.83 meters
  • Maximum Input Current: 10.0 A

Batteries & Runtime

  • Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
  • Typical recharge time: 16 hour(s)
  • Replacement Battery: RBC17
  • Battery Volt-Amp-Hour Capacity: 86
  • Runtime: View Runtime Graph

Communications & Management

  • Interface Port(s):USB
  • Control panel: LED status display with On Line: On Battery: Replace Battery and Overload indicators

Surge Protection and Filtering

  • Surge energy rating:310 Joules
  • Data Line Protection:Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
  • Filtering: Full time multi-pole noise filtering: 5% IEEE surge let-through: zero clamping response time: meets UL 1449

Physical

  • Maximum Height:89, 8.9 cm
  • Maximum Width: 224, 22.4 cm
  • Maximum Depth: 311, 31.1 cm
  • Net Weight: 6.93 kg
  • Shipping weight: 7.84 kg
  • Shipping Height: 127, 12.7 cm
  • Shipping Width: 279, 27.9 cm
  • Shipping Depth: 400, 40.0 cm
  • Master Carton Dimensions (Length x Width x Height): 324
  • Master Carton Units: 1.0
  • Master Carton Weight: 16.36

Environmental

  • Operating Environment: 0 - 40 °C
  • Operating Relative Humidity: 0 - 95 %
  • Operating Elevation:0-9000 meters
  • Storage Temperature: -15 - 40 °C
  • Storage Relative Humidity: 0 - 95 %
  • Storage Elevation: 0-9000 meters
  • Audible noise at 1 meter from surface of unit: 40.0 dBA

Conformance

  • Approvals: A-tick, C-tick, CE, Telepermit
  • Equipment protection policy: Lifetime: 150000 AUD
  • Standard warranty:2 years repair or replace

Sustainable Offer Status

  • RoHS: Compliant
  • REACH:REACH: Contains No SVHCs
  • PEP: Available in Documentation
  • EOLI: Available in Documentation